Disassembly
Removing and Replacing the Keypad
30
1.
Remove the rear housing cover, battery, antenna and endo housing as
described in the procedures.
2.
Use the disassembly tool to lift the keypad up and away from the front housing
as shown in Figure 17.
Figure 17. Removing the Keypad
3.
To replace, insert the keypad into the front housing. Ensure the keys align with
the openings and the keypad is fully seated in the front housing.
4.
Replace the endo housing, antenna, battery, and rear housing cover, as
described in the procedures.
July 19, 2002
020453o
6881040B85