Motorola ROKR E2 Service Manual page 31

Level 1 and 2 Service Manual
6809497A99-O
3. Use the disassembly tool to unseat the flex connector on the transceiver PC
board under the rear housing (see Figure 13).
Rear housing
Figure 13. Removing the rear housing
4. To replace, align the front and rear housings. Carefully seat the flex connector
onto its socket on the transceiver PC board.
5. Lower the rear housing onto the phone.
6. Insert and tighten the 4 housing screws using the T6 driver. Tighten to
24.5 Ncm. Do not overtighten.
7. Replace the side bands, SIM, battery, battery cover, and SD card as described
in the procedures.
March 27, 2006
Disassembly tool
Disassembly
Flex
connector
0511980o
31