Removing And Replacing The Keypad - Motorola GSM 900/DCS 1800MHz Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Keypad

6881040B65
1. Remove the rear housing cover, SIM, and endo assembly as described in the
procedures.
2. Use the disassembly tool to lift the keypad up and away from the front housing
as shown in Figure 14.
FRONT HOUSING
PLASTIC TWEEZERS
Figure 14. Removing the Keypad
3. To replace, insert the keypad into the front housing. Ensure the keys align
properly with the openings and the keypad is fully seated in the front housing.
4. Replace the endo assembly, SIM, and rear housing cover, as described in the
procedures.
August 20, 2002
KEYPAD
Disassembly
020191o
31