Removing And Replacing The Keypad, Volume/Smart And Voice Buttons - Motorola V975 Service Manual

Level 1 and 2 Service Manual
Removing and Replacing the Keypad, Volume/Smart, and Voice Buttons
6809490A74-O
1. Remove battery cover, battery, SIM, antenna, rear housing, and transceiver
board assembly as described in the procedures.
2. Using the plastic tweezers, lift the top part of the keypad assembly, which
includes the volume/smart buttons and voice button, away from the
transceiver board assembly (see Figure 14).
Figure 14. Removing the Keypad, Volume/Smart, and Voice Buttons
3. There are two light guides at the bottom of the keypad assembly. Remove the
light guides and the keypad assembly from the transceiver board with extreme
caution.
4. To replace, carefully insert the light guides into their slots on the front housing.
Avoid damaging to the light guides while inserting them.
5. Carefully set the keypad volume/smart buttons and voice button assembly onto
the metal switchdome assembly. Ensure the volume/smart key keypads make
contact with the switchdome assembly on the transceiver board when installed.
6. Insert the keypad into the front housing, ensuring the keys align properly with
the openings in the front housing.
7. Replace the transceiver board assembly, display flex connector, rear housing
assembly, antenna, SIM, battery, and battery cover as described in the
procedures.
November 12, 2004
Tweezers
Light Guide
Light Guide
Keypad
Disassembly
040954o
29