Disassembly
Removing and Replacing the Keypad
Removing and Replacing the Keypad PCB Assembly
26
1.
Remove the battery cover, battery, SIM, rear housing cover, rear transceiver
housing, and transceiver board as described in the procedures.
2.
Using the tweezers, lift the keypad away from the front transceiver housing
as shown in Figure 13.
PLASTIC TWEEZERS
FRONT HOUSING
Figure 13. Removing the keypad
3.
To replace, insert the keypad into the front housing. Ensure the keys align
properly with the openings and the keypad is fully seated in the front housing
4.
Replace the transceiver board, rear transceiver housing, rear housing cover,
SIM, battery, and battery cover as described in the procedures.
1.
Remove the battery cover, battery, SIM, rear housing cover, rear transceiver
housing, and transceiver board as described in the procedures.
January 08, 2002
KEYPAD
011103o
6881039B25