7.7 Integrated Peripherals
This section sets configurations for your hard disk and other integrat ed
peripherals. The first screen shows three main items for user to select. Once
an item selected, a submenu appears. Details follow.
OnChip IDE Device
Onboard Device
SuperIO Device
GiGA Lan Boot ROM
GiGA Lan1 Boot ROM
:Move
Enter : Select
F5: Previous Values
On Chip IDE Device / On Chip Primary / Secondary PCI IDE
The integrated peripheral controller contai ns an IDE interface with support for two
IDE channels. Select Enabled to activate each channel separately.
On Chip IDE Device /IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather than have
the BIOS issue a series of commands that transfer to or from the disk drive, PIO
(Programmed Input/Output) allows the BIOS to communicate with the controller and
CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which primarily
differ in timing. When Auto is selected, the BIOS will select the best available mode.
On Chip IDE Device / IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to 33Mb/sec with the
Ultra DMA/33 feature. The options are Auto and Disabled.
Onboard Device/ USB Controller
The options for this field are Enabled and Disabled. By default, this field is set to
Enabled.
I330 Motherboard User Manual
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
[ Press Enter ]
[ Press Enter ]
[ Press Enter ]
[ Enable ]
[ Enable ]
+/-/PU/PD:Value
F10:Save
F6: Fail-Safe Defaults
54
Item Help
Menu Level
ESC: Exit
F1:General Help
F7: Optimized Defaults