Chimney Sweep Mode (Forced Full Load Or Part Load) - DeDietrich INNOVENS PRO User And Installation Manual

Fig.80 Step 3
Fig.81 Step 4
Fig.82 Step 5
Fig.83 Step 6
Fig.84 Step 7
Fig.85 Step 6
Fig.86 Step 7
Fig.87 Step 8
Fig.88 Step 9
Fig.89 Step 10
5.5

Chimney sweep mode (forced full load or part load)

Fig.90 Step 1
7667004 - v.01 - 12072017
3. Keep pressing the
MW-3000313-01
4. Press the
MW-3000314-01
5. Keep pressing the
played.
MW-3000406-02
6. Press the
MW-3000407-01
7. Keep pressing the
MW-3000448-01
8. Press the
MW-3000343-01
9. Press the
See
The data plate for the
MW-3000344-01
10. Press the
MW-3000345-01
11. Press the
See
The data plate for the
MW-3000346-01
12. Press the
The factory settings are reset. The display shows various informa­
tion and returns to the main display after 3 minutes.
MW-3000347-01
1. Press the two keys on the left simultaneously to select chimney
sweep mode.
The device is now running at part load. Wait until
pears on the display.
MW-3000325-01
key until the code
key to confirm opening the menu.
key until the required device or PCB is dis­
key to confirm the selection.
key until is displayed.
key to open the first factory setting
or key to modify the value.
value.
key to confirm the value.
or key to modify the value.
value.
key to confirm the value.
5 Installer instructions
is displayed.
.
ap­
19