Description Of The Product; Control Panel Description; What Each Key Means; Meaning Of The Symbols On The Display - DeDietrich INNOVENS PRO User And Installation Manual

3

Description of the product

3.1

Control panel description

Fig.1 Control panel
1 2
5
Tab.1 Possible symbols in the display (depending on available devices or functions)
Chimney sweep mode is enabled (forced full load or part load for O
Information menu: read out various current values.
User menu: settings for user level parameters can be changed.
Installer menu: parameters at installer level can be changed.
Manual mode menu: manual mode can be configured.
Error menu: errors can be read out.
Hour counter/timer program/time display menu.
7667004 - v.01 - 12072017
The MCA boiler is delivered with a combination of the control panel and
control PCB. The combination is based on the following software and navi­
gation information:
3.1.1
3 4
6
AD-3000833-01
3.1.2
Boiler MCA
Important
Content of this manual is based on software version 0.17
Name / navigate to:
Control panel Inicontrol 2
Important
Content of this manual is based on software version 2.0
Name / navigate to:
Control PCB SCB-01
Important
Content of this manual is based on software version 0.2
Name / navigate to:

What each key means

1

Escape: Back to the previous level.
Reset: Manual reset.
2
CH flow temperature Access to set temperature.
Min. key: Lowering the value.
3 DHW temperature:
Plus key: Raising the value.
4
CH/DHW function: Toggles function ON/OFF
Enter key: Confirms selection or value.
5
Chimney-sweeping keys
Important
Press the 1 and 2 keys simultaneously.
6
Menu keys
Important
Press the 3 and 4 keys simultaneously.

Meaning of the symbols on the display

measurement).
2
3 Description of the product
Access to set temperature.
7