Table of Contents
Advertisement
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the wall
control.
Your Wall Control has full control of your Fan and Light
(Figure 31).
NOTE: Prior to operation of the fan and light from
the wall control, set the fan speed to HIGH ( .... ) and
turn the light ON (
).
9.1
To set the desired Fan Speed, press the (
decrease the speed and the (
The LED display will light up to indicate the new speed
selected.
To turn the Light on and off, press and release the
LIGHT (
) button. To set the light intensity, press and
hold the LIGHT (
) button. The light will turn on at the
light intensity previously selected (Figure 31).
If Airflow is desired in the opposite direction, press the
(
) button on the wall control. The fan must be
operating at any speed for the reverse button to
function. The blades will turn in the opposite direction
and reverse the airflow.
Your Wall Control comes complete with your choice of
three Wall Cover Plates; Ivory, White and Light Almond
(Figure 31).
Your fan is now wired to be turned on and off from the
fan switch.
9. Using Your Ceiling Fan
) button to
) to increase the speed.
POWER
INDICATOR
LIGHT
AIRFLOW
DIRECTION
POWER
BUTTON
IVORY
COVER PLATE
COVER PLATE
Figure 31
22
LIGHT
INTENSITY
BUTTON
FAN SPEED
BUTTONS
ON/OFF SWITCH
O = OFF /
WHITE
LIGHT ALMOND
COVER PLATE
= ON
Advertisement
Table of Contents
