Wireless Router Mode - TP-Link TL-WR902AC User Manual


Note:
If the above screen does not pop-up, it means that your Web-browser has been set to a proxy. Go
to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel
the Using Proxy checkbox, and click OK to finish it.
2. After a successful login, you can click the Quick Setup menu to quickly configure your
Router.

3.2.1 Wireless Router Mode

When you have switched the mode of the router on Share ETH, take the following steps:
1. Click Next and then WAN Connection Type page will appear as shown below.
The Router supports five popular ways Dynamic IP, Static IP, PPPoE/Russian PPPoE,
L2TP/Russian L2TP and PPTP/Russian PPTP to connect to the Internet. To make sure the
connection type your ISP provides, please refer to the ISP. Make sure the cable is securely
plugged into the WAN port before detection.
Auto Detect - If you don't know the connection type your ISP provides, use this option to

allow the Quick Setup to search your Internet connection for servers and protocols and
determine your ISP configuration.
Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address for

connecting to the Internet. When the Router connects to a DHCP server, or the ISP supplies
you with DHCP connection, please choose this type. If you choose this type of connection,
you can click Next to continue.
TL-WR902AC AC750 Wireless Travel Router
- 12 -