Lan - TP-Link TL-WR902AC User Manual

Your PC's MAC Address - This field displays the MAC address of the PC that is managing

the Router. If the MAC address is required, you can click the Clone MAC Address To
button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click Save.

Note:
1. Only the PC on your LAN can use the MAC Address Clone function.
2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.

8.3.3 LAN

Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on
the screen below.
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value

can't be changed.
IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default:

192.168.0.1).
Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices

in LAN can watch TV.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically， while the Virtual Server and
DMZ Host will not take effect until they are re-configured.
TL-WR902AC AC750 Wireless Travel Router
- 184 -