TP-Link TL-WR902AC User Manual page 40

Click Survey to find all available 2.4GHz/5GHz networks and choose the ones you want to
3.
access.
4. You can configure the IP parameters of LAN on this page. But if you are not familiar with the
setting items in this page, you're strongly recommended to keep the provided default values.
Type - Choosing SmartDHCP to get IP address from remoter DHCP server, or

choosing static IP to config IP address manually.
IP Address - Enter the IP address of your system in dotted-decimal notation (factory

default: 192.168.0.1).
Subnet Mask - An address code that determines the size of the network. Normally

255.255.255.0 is used as the subnet mask.
5. Click Next, and then Wireless Setting page will appear as shown below.
TL-WR902AC AC750 Wireless Travel Router
- 26 -