Diagnostic - TP-Link TL-WR902AC User Manual

selected, you have to go to the Quick Setup to specify the mode you need.
Note: If Control the system mode by software is checked, the operation mode switch of the
router will be disabled.

7.7.2 Diagnostic

Choose menu "System Tools → Diagnostic", and then you can transact Ping or Traceroute
function to check connectivity of your network in the following screen.
Diagnostic Tool - Check the radio button to select one diagnostic tool.

Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to
•
a given host or gateway.
Traceroute - This diagnostic tool tests the performance of a connection.
•

Note:
You can use ping/traceroute to test both numeric IP address or domain name. If
pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not,
you might have a name resolution problem. In this case, ensure that the domain name you are
specifying can be resolved by using Domain Name System (DNS) queries.
IP Address/Domain Name - Type the destination IP address (e.g. 202.108.22.5) or Domain

name (e.g. http://www.tp-link.com).
Pings Count - The number of Ping packets for a Ping connection. The default is 4.

TL-WR902AC AC750 Wireless Travel Router
- 165 -