FOR-A FA-9520 Operation Manual page 66

Meanwhile, if CEA708 closed caption data is detected in the 1080/59i or
720/59p HD-SDI input signal, and the FS1 and/or FS2 converter output signal
format(s) is/are 525/60, the detected closed caption data will be automatically

converted to S334-1 CC and/or CEA608 CC.
However, if S334-1 CC and/or CEA608 closed caption insertions are disabled,
the data will not be inserted. If the input signal is 1080/59p or 1080/PsF,
detection and automatic conversion to S334-1 CC and/or CEA608 CC will not
be performed.
Closed caption data output will stop when data input is lost. S2016-3 AFD, RP186 VI,
and BT1119 WSS ancillary data will be output according to the ANC LOSS SET
settings when their data input is lost. See section 5-9-7 "ANC LOSS SET" for details.
 Ancillary data combinations that cannot be simultaneously embedded to the same
line.
Video
Ancillary data type
format
S334-1 CC
525/60 S2016-3 AFD
RP186 VI
S2016-3 AFD
625/50 RP186 VI
BT1119 WSS
If the same line is set for the ancillary data combination described as "Unable to set to same
line", and both ancillary data types are set to be embedded in the ANC DATA EMBED menu
(see Sec. 5-7-4), an asterisk "*" will appear next to the selected data type as an error message.
If the sign is displayed, ancillary data will not be properly embedded. The line settings must be
properly set. Usually the default value will properly embed the ancillary data. Keep this in mind
when changing the value to configure a system with other devices.
Error message example:
A N C E M B E D L I N E
A N C : * R P 1 8 6 V I
F O R M A T : 5 2 5 / 6 0
F I E L D 1 : * 1 2 L I N E
F I E L D 2 : * 2 7 5 L I N E
Ancillary data insersion line settings specified under the ANC DATA EMBED (sec.
5-7-4) and ANC EMBED LINE (sec. 5-7-5) menus take priority over the line settings
specified under the SDI LINE MASK menu (sec. 5-9-13) and take effect.
IMPORTANT
S334-1 CC S2016-3 AFD
Can be set to
same line
Can be set to
same line
Unable to set Unable to set
to same line to same line
Unable to set
to same line
Unable to set
to same line
3 8
IMPORTANT
66
RP186 VI BT1119 WSS
Unable to set
to same line
Unable to set
to same line
Unable to set Unable to set
to same line to same line
Can be set to
same line
Can be set to
same line