FOR-A FA-9520 Operation Manual page 196

assignments will be changed to that of the Input Selection. Direct Input Selection and Dolby
Decoder Output signals cannot be input to the Dolby encoder together. Dolby Digital signal
output from the Dolby decoder, Dolby Decoder Output, cannot be encoded to the Dolby E
signal.
*2 Not shown if the FA-95ALA option is not installed in option slot A.
*3 Not shown if the FA-95ALA option is not installed in option slot B.
Dolby Encoder Mode Setting
Parameter
Program
Configuration
Bit Depth
Frame REF
Meta Data
Input
*1 If Bit Depth is set to 16bit, the "＊" will be displayed and the program functions as 5.1. To
select these configurations, set Bit Depth to 20bit.
Default Setting range
5.1+2
5.1+2x1
4+4
4+2x2
4+2+2x1
4+4x1
4x2
3x2+2x1
2x2+4x1
2+6x1
8x1
5.1
5.1+2
4+2
4+2x1
3x2
2x2+2x1
2+4x1
6x1
4
2+2
2+2x1
4x1
7.1
7.1 Screen
20bit
20bit
16bit
FS1
FS1
FS2
Internal
Internal
Dolby Decoder Output
196
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Selects Dolby E encoder program
configuration.
*1
*1
Selects the bit width of the Dolby E
encoder output.
Selects a video output to which the
Dolby E encoder output is
synchronized. (FS 1 or FS 2)
Selects a metadata to be used for
Dolby E encoding.
Internal: Uses the Program
Configuration and Bit Depth settings.
Other metadata will be reset to
default.
Dolby Decoder Output: Uses the
metadata of the Dolby E signal input
to the Dolby decoder.
Program Configuration and Bit
Depth will be ineffective.
Description