FOR-A FA-9520 Operation Manual page 221

Item
Composite In
BY-PASS
Unknown
1080/59i
1080/50i
Reference
1080/23PsF
1080/24PsF
PAL-M
Unknown
1080/59i
1080/50i
*2
Option A
1080/23PsF
1080/24PsF
BY-PASS
Unknown
*3
Option B
Input Mode BETACAM
*1 Shown when PAL-M Mode Set in the 9-4-1 FS1/FS2 Video System is set to Enable, or an input signal
in GENLOCK IN connector is 525/60 or PAL-M signal.
*2 Shown if FA-95AIO is installed in option slot A.
*3 Shown if FA-95AIO is installed in option slot B.
 Video Output Status
Item Display
1080/59i
1080/50i
720/59p
720/50p
SDI Out 1/2
1080/23PsF
1080/24PsF
1080/59p
1080/50p
BY-PASS
Disable
SDI Out 3/4 Same as above
Composite Out BY-PASS
Disable
Display
Loss
Displays the video format of the COMPOSITE input signal.
525/60
Displays "Loss" if there is no input signal.
625/50
Displays "Unknown" if there is an unsupported input signal.
Displays "BY-PASS" if the function is enabled.
Loss
525/60
625/50
Displays the video format of the genlock input signal.
Displays "Loss" if there is no input signal.
720/59p
720/50p Displays "Unknown" if there is an unsupported input signal.
*1
Loss
525/60
625/50
Displays the video format of the Component input signal of
the FA-95AIO installed in option slot A.
Displays "Loss" if there is no input signal.
720/59p
Displays "Unknown" if there is an unsupported input signal.
720/50p
Displays "BY-PASS" if the function is enabled.
Displays the video format of the Component input signal of
Ditto
the FA-95AIO installed in option slot B.
YPbPr
SMPTE
YPbPr
Displays the input signal format of FA-95AIO installed in
option slot A and B.
RGB
Y/C
-----
525/60
625/50
Displays the video format of the SDI1 output signal.
Displays "BY-PASS" if the function is enabled.
Displays "Disable" if there is no signal output.
Displays the video format of the SDI2 output signal.
Displays "BY-PASS" if the function is enabled.
Displays "Disable" if there is no signal output.
Displays the video format of the COMPOSITE output signal.
525/60
Displays "Disable" if there is no signal output.
625/50
Displays "PAL-M" if PAL-M Mode Set is enabled in the 9-4-1
FS1/FS2 Video System menu, and the format setting for the
converted output video signal under Composite Output
PAL-M
Setting in the 9-2-10 Output Assign menu is 525/60.
221
Description
Description