FOR-A FA-9520 Operation Manual page 207

 Channel Status Mask
Parameter Default
EMB1/EMB2
CH1/2-CH15/16
SRC
BY-PASS
AES
CH1/2-CH7/8
*1 Channel status and Validity Bit of input audio channel status can be checked using a wave
form monitor.
*2 Processes the audio signal as described if 9-3-5 SRC Mode is set to Auto.
*3 Processes the audio signal as described if 9-3-10 SDI Audio Output Settings is set to Auto.
 CH STATUS:
FA-9520 determines whether the input audio signal is PCM or NON-PCM by the NON-PCM
flag in the Audio Channel Status (ACS). If ACS is incorrect the audio signal may cause
improper processing. For such case, this setting may effective processing the audio signal
normally.
Use this setting only if there is audio noise or the audio is muted. Otherwise, do not
change the setting from the default setting.
 Validity Bit Mask
Parameter Default
EMB1/EMB2
CH1/2-CH15/16
SRC
Bypass
AES
CH1/2-CH7/8
*1 Channel status and Validity Bit of input audio channel status can be checked using a wave
form monitor.
*2 Processes the audio signal as described if 9-3-5 SRC Mode is set to Auto.
*3 Processes the audio signal as described if 9-3-10 SDI Audio Output Settings is set to Auto.
 Validity:
FA-9520 determines whether the input audio signal is PCM or NON-PCM by Validity Bit (V Bit)
in audio signal. If Validity Bit (V Bit) is incorrect the audio signal may cause improper
processing. For such case, this setting may effective processing the audio signal normally.
Please use this setting only if there is audio noise or the audio is muted. Otherwise, do
not change the setting from In Data.
Setting range
Selects audio error sensor mode for each
stereo channel pair of SDI and AES input
audio signals whose channel status
NON-PCM flag is 1.
SRC BY-PASS: Treats audio signals as
NON-PCM. By-passes audio signals through
SRC BY-PASS
*2
SRC
PCM
NON-PCM signal channel for SDI AUDIO
Mute
CLOCK.
PCM: Treats audio signals as PCM (standard
audio signal). By-passes audio signals
through SRC
SDI AUDIO CLOCK.
Mute: Treats audio signals as mute signals.
IMPORTANT
Setting range
Selects audio error sensor mode for each
stereo channel pair of SDI and AES input
audio signals whose channel status Validity
Bit flag is 1.
SRC BY-PASS: Treats audio signals as
NON-PCM. By-passes audio signals through
SRC BY-PASS
SRC
PCM
NON-PCM signal channel for SDI AUDIO
Mute
CLOCK.
PCM: Treats audio signals as PCM
(standard audio signal). By-passes audio
signals through SRC
REFERENCE for SDI AUDIO CLOCK.
Mute: Treats audio signals as mute signals.
IMPORTANT
207
Description
*1
, and selects audio clock input in the
*3
*2
, and select REFERENCE for
*3
Description
*1
*2
, and selects audio clock input in the
*3
*2 , and select
*3