FOR-A FA-9520 Operation Manual page 165

 Aspect Ratio
Parameter Default
AFD(4:3)
Aspect
Ratio
AFD
The Aspect Ratio setting cannot be changed if Converter Process Mode is set to BY-PASS.
*1 BT1119 WSS will be embedded according to the WSS AFD ERROR settings (Sec. 5-9-8)
for non-WSS aspect ratio conversions.
 Motion Sense
Parameter Default
Motion Sense Adaptive
Setting Motion Sense to Frame (Odd 1st) or Frame (Even 1st) for input signals other
than progressive segment frame inputs cause motion artifacts. In such case, change
Motion Sense setting to Field or Adaptive.
Setting range
AFD(4:3)
Selectable aspect ratio settings when Converter
AFD-ALT(4:3)
Process Mode is set to SD.
AFD(16:9)
AFD(4:3), AFD-ALT(4:3), AFD(16:9),
AFD-ALT(16:9)
AFD-ALT(16:9) automatically select an aspect
4:3 L 16:9 T
ratio according to the AFD data in the input
4:3 L 14:9 T
signal. If no AFD data is found in the input
4:3 L>16:9
signal, the aspect ratio will be determined
4:3 F 4:3
according to the setting made under 5-9-7 ANC
4:3 L 16:9PRTD
LOSS SET.
4:3 L 14:9
To output video signals in 4:3, select either ratio
4:3 F ALT14:9
with (4:3). To output in 16:9, select either ratio
4:3 L ALT14:9 *1
with (16:9). Other options will output video
4:3 L ALT 4:3 *1
signals in the specified aspect ratio. See
16:9 L>16:9
section 20 "About AFD (Active Format
16:9 F 16:9 *1
Description)" for details.
16:9 P 4:3
Options (4:3 L 16:9 T to 16:9 F ALT 4:3) other
16:9 F PRTD *1
than the above four require the input signal
16:9 P 14:9 *1
aspect ratio to be specified under SD Aspect
16:9 P ALT 14:9 *1
in 9-2-1 FS Input Select if the input signal is an
16:9 F ALT14:9*1
SD signal.
16:9 F ALT4:3 *1
Selectable aspect ratios when CONV1 is set to
1080i, 720p, 1080PsF, or 1080(3G).
AFD
AFD and AFD-ALT automatically select an
AFD-ALT
aspect ratio according to the AFD data in the
16:9 L>16:9
input signal. If no AFD data is found in the input
16:9 F 16:9
signal, the aspect ratio will be determined
16:9 P 4:3
according to the setting made under 5-9-7 ANC
16:9 F PRTD
LOSS SET.
16:9 P 14:9
16:9 P ALT14:9
Options other than the above two output in the
specific aspect ratio. See section 20 "About
16:9 F ALT14:9
16:9 F ALT4:3
AFD" for details on conversions according to
AFD data.
Setting range
(Steps)
Field: Generates a progressive scan image
from one field of an interlaced scan image.
The created image has no motion artifacts, but
vertical resolution will be reduced.
Adaptive: Detects whether there is motion or
no motion in the scene, and generates an
Field
optimal progressive scan image.
Adaptive
Frame(Odd 1st): Generates a progressive
Frame(Odd 1st)
scan image from two fields (odd/even) of an
Frame(Even 1st)
interlaced scan image.
Suitable for the progressive segment frame
input of progressive scan signals.
Frame(Even 1st): Generates a progressive
scan image from two fields (even/odd) of and
interlaced scan image.
IMPORTANT
165
Description
Description