FOR-A FA-9520 Operation Manual page 145

*4 Effective if the FA-95AIO option is installed in option slot A.
*5 Effective if the FA-95AIO option is installed in option slot B.
*6 Shown if the FA-95PS option is installed.
*7 FS1 LOGOs 1 - 7, and FS2 LOGOs 1 – 7 will be displayed, if selected, as "LOGO ID: 1". Logo ID can be
assigned to any number 1 through 256. In the following cases, the logo will not be inserted to the FS
output signals, although data will be loaded to the FA-9520.
- No logo is registered under the selected Logo ID.
- The registered logo format and converter output video format do not match.
- The keyer of the relevant FS is turned off.
*8 Shown if the FA-95ALA option is installed in option slot A.
*9 Shown if the FA-95ALA option is installed in option slot B.
 INPUT FUNCTION
Function
NONE
*1
BY-PASS (SDI1)
*1
BY-PASS (SDI2)
*1
BY-PASS (VBS)
FS1/FS2 FREEZE *2
FS1/FS2 FULL CB
FS1/FS2 75% CB
FS1/FS2 SMPTE CB
FS1/FS2 RAMP
FS1/FS2 AUDIO
EXT AUDIO
FS1/FS2 SDI1, 2
FS1/FS2 COMPOSITE
*3
FS1/FS2 OP A
*4
FS1/FS2 OP B
*5
DEFAULT
EVENT 1 – 100
*5
FS1/FS2 KEYER
FS1/FS2 LOAD 1-7
*6
LOUD1, 2A START
*7
LOUD1, 2B START
*6
LOUD1, 2A CLEAR
*7
LOUD1, 2B CLEAR
Mode
No function
Sets BY-PASS ON/OFF for SDI IN 1 to SDI OUT 1.
Level Shorted to GND:
OPEN:
Sets BY-PASS ON/OFF for SDI IN 2 to SDI OUT 3.
Level
Shorted to GND:
OPEN:
Sets BY-PASS ON/OFF for COMPOSITE IN to
COMPOSITE OUT.
Level
Shorted to GND:
OPEN:
Sets FREEZE ON/OFF for each FS.
Level Shorted to GND:
OPEN:
Selects FULL CB (color bar) for the test signal for each FS.
Level Shorted to GND:
OPEN:
Selects 75% CB for the test signal for each FS.
Level Shorted to GND:
OPEN:
Selects SMPTE CB for the test signal for each FS.
Level Shorted to GND:
OPEN:
Selects RAMP for the test signal for each FS.
Level Shorted to GND:
OPEN:
Sets AUDIO test signal ON for each FS.
Level Shorted to GND:
OPEN:
Sets AES and ANALOG AUDIO test signals ON
Level Shorted to GND:
OPEN:
Selects an input video signal for each FS. Switches over to
Pulse
the selected input signal when shorted to GND.
Loads the DEFAULT, and events 1 through 100.
Pulse
When shorted to GND, the assigned settings (among
default and events) will be loaded.
Sets the keyer ON/OFF for each FS.
Level Shorted to GND:
OPEN:
Loads the logo assigned to a LOGO ID to the selected FS.
Pulse
FS1/2 LOAD 1 - LOAD 7 are assigned to LOGO IDs.
Starts or Stops respective LOUDNESS measurements.
Level Shorted to GND:
OPEN:
Clears respective LOUDNESS measurements.
Pulse
Shorted to GND:
145
Description
BY-PASS ON
BY-PASS OFF
BY-PASS ON
BY-PASS OFF
BY-PASS ON
BY-PASS OFF
FREEZE ON
FREEZE OFF
FULL CB ON
FULL CB OFF
75% CB ON
75% CB OFF
SMPTE CB ON
SMPTE CB OFF
RAMP ON
RAMP OFF
AUDIO test signal ON
AUDIO test signal OFF
AUDIO test signal ON
AUDIO test signal OFF
Keyer ON
Keyer OFF
Starts LOUDNESS measurement
Stops LOUDNESS measurement
Clears LOUDNESS measurement.