FOR-A FA-9520 Operation Manual page 203

 FS1, FS2 Synchro Mode
Parameter
Synchro Mode
*1
*2
*3
*4
*5
*7
Sync Format
*1 *3
Forced Field
*1 Selecting ODD/EVEN for Forced Field, while FS Input Select(9-2-1) is set to Composite, Synchro Mode
to Frame Sync, and Frame Delay(9-2-3) to 0 frame, the Frame Delay setting value will always reset to 1
frame. Set Frame Delay to between 1 and 8 frames.
*2 Frame Delay (9-2-3) cannot be set if Synchro Mode is set to Line Sync, or AVDL.
*3 Forced Field cannot be set if Synchro Mode is set to Line Sync, or AVDL.
*4 The Freeze function via GPI input is disabled if Synchro Mode is set to Line Sync, or AVDL. See
section 9-5 "GPI" for details.
*5 Changing the Synchro Mode setting will reset 1080 V Phase and 720 V Phase settings in HD Phase
menu and the V PHASE setting in SD Phase menu to their default values according to the set Synchro
Mode.
*6 Switching input signals with a phase difference using a router or such device may cause shock noise to
occur on video or audio signals if the phase difference (compared to the genlock signal) exceeds the
range shown in the following table. If the difference is within range, shock noise will not occur.
*7 This item is disabled if an FA-95CO option is installed and Format Error Trigger in section 9-2-1 "FS
Input Select" is enabled.
Video format
SD
HD
Table of Reference signals and Input formats that can lock
Input signal 525/60
✓✓✓
525/60
✓✓✓
1080/59i
✓✓✓
720/59p
✓✓✓
1080/59p
-
625/50
-
1080/50i
-
720/50p
-
1080/50p
✓
1080/23PsF
-
1080/24PsF
✓✓✓:
SYNCHRO can be set to FRAME, LINE, or AVDL.
△: SYNCHRO can only be set to FRAME.
-: Unable to synchronize.
Default Setting range
Frame Sync
Frame
Line Sync
Sync
*6
AVDL
Auto Detect
525/60
625/50
1080/59.94i
1080/50i
Auto
720/59.94p
Detect
720/50p
1080/23PsF
1080/24PsF
1080/59.94p
1080/50p
Off
Off Odd
Even
Phase difference from genlock signal
-1H (with line differences depending on video format) to +1/2H
-5H (with line differences depending on video format) to +1/2H
1080/59i 720/59p 625/50
✓✓✓ ✓
✓✓✓ ✓
✓✓✓ ✓✓✓
✓✓✓ ✓✓✓
- - ✓✓✓
- - ✓✓✓
- - ✓✓✓
- - ✓✓✓
✓ ✓
- -
203
Description
Frame Sync: Enables horizontal and vertical
alignment of video signals to a genlock signal.
Effective on both synchronous and asynchronous
signals.
Line Sync: Locks the video signal of within ±1/2H
to a genlock signal. Output delay is 1H. Effective
only when video signal is synchronous to the
genlock signal.
AVDL: Locks the video signal to a genlock signal
with a 1H delay. Effective only when video signal is
synchronous to the genlock signal.
Input Lock: Locks the system to an input video
signal. The delay can be adjusted by System
Phase and/or Frame Delay. However, the minimum
delay is 520clk common in all formats. (HD: 74
MHz, SD: 27MHz) Does not use a genlock signal.
Sets a system format for the FA-9520.
Auto Detect: Detects and sets the detected input
video format to the system format.
Other values make the system work in the format.
Selects which field to be used twice to compose a
frame.
(Effective on composite signal inputs.)
Reference signal
1080/50i 720/50p
- - -
- - -
- - -
- - -
✓✓✓ ✓
✓✓✓ ✓
✓✓✓ ✓✓✓
✓✓✓ ✓✓✓
- - -
✓ ✓ ✓
1080/23PsF 1080/24PsF
✓ -
✓ -
✓ -
✓ -
- ✓
- ✓
- ✓
- ✓
✓✓✓ -
- ✓✓✓