FOR-A FA-9520 Operation Manual page 169

 White Level
Parameter
R, G, B
(RGB White Level)
Group Adjust
If AVO Control is set to Auto in the Auto Video Optimizer (AVO) menu (9-2-2), the White Level
setting cannot be changed.
 Black Level
Parameter
Red, Green, Blue
(RGB Black Level)
Group Adjust
If AVO Control is set to Auto in the Auto Video Optimizer (AVO) menu (9-2-2), the Black Level
setting cannot be changed.
 Gamma Level
Parameter
Red, Green, Blue
(RGB Gamma level)
Group Adjust
Curve
(Gamma Curve)
If AVO Control is set to Auto in the Auto Video Optimizer (AVO) menu (9-2-2), the all Gamma
Level/Curve settings cannot be changed. Also, if AVO Control is set to Hold, the Curve setting
cannot be changed.
 Sepia
The Sepia Level and Color settings can be changed if Correction Mode is set to Sepia.
Sepia will not be displayed while changing FS1 and FS2 settings simultaneously.
Parameter Default
Level 25.0%
Color -160.0°
If AVO Control is set to Auto or Hold in the Auto Video Optimizer (AVO) menu (9-2-2), the
Sepia settings cannot be changed.
Differential or Sepia mode settings under Correction Mode will automatically change
to Balance mode whenever AVO is enabled.
While AVO is being used, the color corrector performs correction as if Correction Mode
is in Balance mode and the gamma curve type is Black curve.
Color correction enabled by setting AVO Control to Hold is also performed in the
above state.
Setting range
Default
(Steps)
0.0 - 200.0％
100.0%
(0.5％)
On
Off
Off
Setting range
Default
(Steps)
0.0 - 200.0％
100.0%
(0.5％)
On
Off
Off
Setting range
Default
(Steps)
0 - 200％
100.0%
(0.5％)
On
Off
Off
Center
Center
Black
White
Setting range
(Steps)
0 - 100％
(0.1％)
--179.8° - 180.0°
(0.2°)
IMPORTANT
169
Description
Adjusts the white level of R, G, and B
components separately.
Enables you to adjust white level R, G, and B
components simultaneously, retaining
separately adjusted R, G, and B proportion,
by changing the value of one component.
Description
Adjusts the black level of R, G, and B
components separately.
Enables you to adjust black level R, G, and B
components simultaneously, retaining
separately adjusted R, G, and B proportion,
by changing the value of one component.
Description
Adjusts the gamma level of R, G, and B
components separately.
Enables you to adjust gamma level R, G,
and B components simultaneously,
retaining separately adjusted R, G, and B
proportion, by changing the value of one
component.
Selects a gamma curve type.
Description
Adjusts the color level in SEPIA mode.
Adjusts the color in SEPIA mode.