How To Operate - Yanmar 4LHA-HTP Operation Manual

4. HOW TO OPERATE

• Neveroperate the engine whiie you are under the influence of alcohol or when
you are ill or feel unwell as this results in accidents.
Exhaust Gas Poisoning
• Be sure to establish good ventilation in the engine room with windows,
vents, or other ventilation equipment. Check again during operation
to be sure that ventilation is good. Exhaust gas contains poisonous
carbon monoxide and should not be inhaled.
Moving Parts
• Do not touch the moving parts of the engine (propeller shaft, V-bett,
PTO-pulley, etc.) during operation or let your clothing get caught
them as this can result in Injury.
• Never operate the engine without the covers on the moving parts.
• Check before starting the engine to see that any tools or cloths used
in maintenance have been removed from the area.
Burns from Contact with Hot Engine Parts
• The whole engine is hot during operation and immediately after stop-
ping. The turbocharger, exhaust manifold, exhaust pipe, and engine
are very hot. Never touch these parts with your body or clothing.
ST
4.1 Inspection Before Starting
Be sure to check the following items daily before starting the engine.
(1) Visual Check
Check for the following:
If any problem is found, do not use the engine until repairs have been completed.
• Oil leakage from the lube oil system.
• Water leakage from the cooling water system
• Damage to parts
(2) C h e c k i n g a n d R e s u p p l y i n g Fuel O i l
Check the fuel level inside the fuel tank and supply with the recommended fuel, if necessary.
(3) C h e c k i n g a n d R e s u p p l y i n g E n g i n e L u b e Oil
© Check the engine oil level with the oil dipstick.
(2) If the oil level is low, supply with the recommended lube oil to the filler port.
Supply oil up to the top mark on the oii dipstick.
A W A R N I N G
A W A R N I N G
A C A U T I O N
• Fuel oil leakage from the fuel system
• Loosening or loss of bolts
- 3 2 -
. „ . . .
M
Wm
••w
^
.
WBr
See 3.2
^ ^