Precaution For Safe Servicing; (A) Service Shop (Place) - Yanmar 4LHA-HTP Operation Manual

Chapter 0 For Safety

2. Precaution For Safe Servicing

2. Precaution For Safe Servicing

(A) Service Shop (place)

Place allowing sufficient ventilation
AWARNING
Jobs such as engine running, part welding and polishing the paint with
sandpaper should be done in a well-ventilated place.
[Failure to Observe]
Very dangerous for human body due to the possibility of inhaling poi-
sonous gas or dust.
Sufficiently wide and flat place
A CAUTION
The floor space of the service shop for inspection and maintenance
should be sufficiently wide and flat without any holes.
[Failure to Observe]
An accident such as a violent fall may be caused.
Clean, orderly arranged place
A CAUTION
No dust, mud, oil or parts should be left on the floor surface.
[Failure to Observe]
An unexpected accident may be caused.
' Bright, safety illuminated place
A CAUTION
The working place should be illuminated sufficiently and safely.
For a job in a dark place where it is difficult to see, use a portable safety
lamp.
The bulb should be covered with a wire cage for protection.
[Failure to Observe]
The bulb may be broken accidentally causing ignition of leaking oil.
Place equipped with a fire extinguisher
A CAUTION
Keep a first aid kit and fire extinguisher close at hand in preparation for fire
emergencies.
0-2
4LHA Series