Required Tools And Equipment - Cisco XR 12000 Series Hardware Installation Manual

Required Tools and Equipment

For safety, periodically check the resistance value of the ESD strap. The measurement should be
Warning
between 1 and 10 megohms.
Required Tools and Equipment
You need the following tools and parts to remove and install SIPs:
•
•
•
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
3-4
Flat-blade or Phillips screwdriver
ESD-preventive wrist or ankle strap and instructions
Interface cables to connect the SIP with another router or switch
Chapter 3 Preparing to Install a Shared Port Adapter or a SPA Interface Processor
OL-17438-04