2-Port Gigabit Ethernet Spa (Version 2) Leds - Cisco XR 12000 Series Hardware Installation Manual

Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters
Figure 2-12
1
2
Table 2-14
Table 2-14
LED Label
A/L
STATUS

2-Port Gigabit Ethernet SPA (Version 2) LEDs

The 2-Port Gigabit Ethernet SPA (Version 2) has two types of LEDs: an A/L LED for each SFP port and
a STATUS LED, as shown in
Figure 2-13
Table 2-15
1
OL-17438-04
2-Port Gigabit Ethernet SPA Faceplate
1
A/L (Active/Link) LED
STATUS LED
describes the 2-Port Gigabit Ethernet SPA LEDs.
2-Port Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Figure
2-Port Gigabit Ethernet SPA (Version 2) Faceplate
describes the 2-Port Gigabit Ethernet SPA (Version 2) LEDs.
A/L (Active/Link) LED
3 RJ-45 port (not supported on Cisco XR 12000 Series Router)
State Meaning
Off Port is not enabled.
On Port is enabled and the link is up.
On Port is enabled and the link is down.
Off SPA power is off.
On SPA is ready and operational.
On SPA power is on and good, and SPA is being configured.
2-13.
1
2 STATUS LED
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
2-Port Gigabit Ethernet SPA Overview
3
SPA-2X1GE
SPA-2X1GE-V2
2
2
2-17