Cisco Xr 12000 Sip-600 Physical Specifications - Cisco XR 12000 Series Hardware Installation Manual

Cisco XR 12000 SIP-600 Overview

Cisco XR 12000 SIP-600 Physical Specifications

The Cisco XR 12000 SIP-600 physical specifications are shown in the following table.
Table 1-5
Description
Physical dimensions
Shipping weight
Operating temperature
Relative humidity
Storage temperature
SPA Subslot Numbering on the Cisco XR 12000 SIP-600
The Cisco XR 12000 SIP-600 accepts 2 single-width SPAs or 1 dual-width SPA.
Figure 1-3
the right SPA slot is subslot 1. If one dual-width SPA is installed, it is recognized as being in subslot 0.
Figure 1-3
Table 1-6
Call Out Number
1
2
SPA Interface Addresses on the Cisco XR 12000 SIP-600
A Cisco 12000 Series Router identifies a SPA interface address by its SIP slot number, SPA subslot, and
port number on the SPA, in the format slot/subslot/port. Subslots and ports are numbered starting from
0, so each Cisco XR 12000 SIP-600 has two subslots 0 (left) and 1 (right). For example, the interface
address of a 1-port SPA located in the second SIP subslot, where the SIP is inserted into router line card
slot 3 is 3/1/0.
SPA and the 10-Port Gigabit Ethernet SPA.
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
1-6
Cisco XR 12000 SIP-600 Physical Specifications
Specifications
Occupies one line card slot on a Cisco 12000 Series Router
10kg
32 to 104°F (0 to 40°C)
10 to 90 percent, noncondensing
–4 to 149°F (–20 to 65°C)
shows a Cisco XR 12000 SIP-600 with 2 SPAs installed. The left SPA slot is subslot 0 and
Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
1
2
Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
Description
Subslot 0
Subslot 1
Figure 1-4 shows the slot, subslot, and port locations for the 1-Port 10-Gigabit Ethernet
Chapter 1 Overview: Cisco XR 12000 Series Router SPA Interface Processors
OL-17438-04