1-Port Oc-192/Stm-64 Pos Spa Overview; 1-Port Oc-192/Stm-64 Pos/Rpr Spa Leds - Cisco XR 12000 Series Hardware Installation Manual

Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters

1-Port OC-192/STM-64 POS SPA Overview

The 1-Port OC-192/STM-64 POS/RPR SPA is a double-height SPA that is installed in two SIP subslots.
The 1-Port OC-192/STM-64 POS/RPR SPA provides SONET and SDH network connectivity with a
bandwidth of 9.95 Gbps.
For more information about SPA bandwidth, see the "Bandwidth Oversubscription" section on page 2-2.
For more information about SPAs and their compatibility with SIPs and modular optics, see the "SIP and
SPA Compatibility" chapter in this guide.
The 1-Port OC-192/STM-64 POS/RPR SPA uses a single,10-Gbps fixed optical receptacle allowing a
connection to single-mode optical fiber. For more information on the optical fiber cables used with this
SPA, see the
Cables" section on page
The following sections describe the 1-Port OC-192/STM-64 POS/RPR SPA:
•
•
•

1-Port OC-192/STM-64 POS/RPR SPA LEDs

The 1-Port OC-192/STM-64 POS/RPR SPA has six LEDs, as shown in
Figure 2-25
1
2
3
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. In
Note
Cisco IOS Release 12.0(31)S, RPR/SRP mode is not supported.
OL-17438-04
"1-Port OC-192/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and
2-39.
1-Port OC-192/STM-64 POS/RPR SPA LEDs, page 2-37
1-Port OC-192/STM-64 POS/RPR SPA Interface Specifications, page 2-38
1-Port OC-192/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and Cables,
page 2-39
1-Port OC-192/STM-64 POS/RPR SPA Faceplate
TX
WRAP LED
PASSTHRU LED
MATESYNC LED
1 3 5
2 4
RX
4 CARRIER LED
5
ACTIVE LED
6
STATUS LED
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide

1-Port OC-192/STM-64 POS SPA Overview

Figure 2-25.
6
SPA-OC192POS LR
2-37