Objectives; Organization - Cisco XR 12000 Series Hardware Installation Manual

Table 1
Release No. Revision
3.3 Rev. A1
3.2 Rev. A0

Objectives

This document describes the shared port adapters (SPAs) and SPA Interface Processors (SIPs) that are
supported on Cisco XR 12000 Series Routers. This document also describes how to install the supported
SIPs and SPAs and how to troubleshoot the installation.

Organization

This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
OL-17438-04
Changes to This Document
Date Change Summary
May 15, 2006 Provides descriptions and installation instructions for the following
SIPs and SPAs:
•
•
•
•
•
•
•
April 14, 2005 Initial release and 1st publication. Provides descriptions and
installation instructions for the following SIPs and SPAs:
•
•
•
•
•
Title
Overview: Cisco XR 12000 Series
Router SPA Interface Processors
Overview: Cisco XR 12000 Series
Router Shared Port Adapters
Preparing to Install a Shared Port
Adapter or a SPA Interface Processor
Installing and Removing a SPA
Interface Processor
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
Cisco XR 12000 SIP-401
Cisco XR 12000 SIP-501
Cisco XR 12000 SIP-601
2-Port and 4-Port Channelized T3 SPA
2-Port and 4-Port Clear Channel T3/E3 SPA
8-Port FastEthernet SPA
2-Port OC-48 POS/RPR SPA
Cisco XR 12000 SIP-600
1-Port 10-Gigabit Ethernet SPA
5-Port Gigabit Ethernet SPA
10-Port Gigabit Ethernet SPA
1-Port OC-192/STM-64 POS/RPR SPA
Description
Provides a SIP/SPA compatibility summary. For
each supported SIP, provides a summary of SIP
characteristics and a SIP overview.
For each supported SPA, provides a summary of
SPA characteristics and a SPA overview.
Describes the required tools, equipment, and
safety guidelines for installing SIPs and SPAs.
Describes the procedures for installing and
removing a SIP on a Cisco 12000 Series Router.
xi