Tail Light Does Not Come On - Malaguti Centro 50 4T Workshop Manual

TAIL LIGHT DOES NOT COME ON

1. Check lamp and lamp socket
• See Pr. "Checking Switches" (P. 13).
OK
. Check voltage
• Connect Tester (0 v AC) to six-way connector of tail light wiring, as follows:
• Terminal (+) of Tester
• Terminal (-) of Tester
• Run engine at ~ 000 RPM.
• Flick light switch to ( ) symbol.
• Power measured must be > 1 v.
OK
Wiring of tail light () is interrupted: repair it.
See "Wiring Diagram" (P. 8).
E L E C T R I C A L S T A R T I N G S Y S T E M L I G H T S Y S T E M
Replace lamp and/or lamp socket.
Pink cable (1).
Black cable ().
Pink cable between tail light connector and right hand
switch is interrupted: repair it.
See "Wiring Diagram" (P. 8).
NO
NO
 
Tester (AC 0 v)

1

F. 19