Starter Press Button; Wiring - DG Flugzeugbau DG-1000T Maintenance Manual

1.15.10 Starter Press Button

The starter press button is located in the centre of the throttle handle and
activates, via the interlocks, the starter relay in the control unit, see sect. 1.15.3.

1.15.11 Wiring

The wire gauges are given in the wiring plan 108E102 at the end of the wire No.
in AWG.
Shielded wires may be identified by circles at their ends.
Specification
MIL-W_22759/16- 6
MIL-W_22759/16- 8
MIL-W_22759/16- 10 -WS
MIL-W_22759/16- 14 -WS
MIL-W_22759/16- 16 -WS
MIL-W_22759/16- 18 -WS
MIL-W_22759/16- 22 -WS
MIL-C_27500-
MIL-C_27500-
RG 174
LiYCY
LiYCY
LiYCY
LiYCY
Instead of wires from the MIL specifications mentioned above suitable wires
approved for aircraft use from other aircraft or MIL specifications may be used:
Operating range min.: -55°C up to 105°C (-67°F up to 220° F), in the engine
compartment up to 150°C (300°F), operating voltage 600 V.
Issued: October 2014
Maintenance Manual DG-1000T
-WS
-WS
22 TG1T14
22 TG2T14
TN1000/24
AWG mm²
6 13
8 8
10 6
14 2
16 1,3
18 0,9
22 0,4
22 0,4 with shielding
2x22 2x0,4 with shielding
with shielding
1x0,25 with shielding
2x0,25 with shielding
3x0,25 with shielding
6x0,25 with shielding
1.30