Control Surface Seals And Turbulators - DG Flugzeugbau DG-1000T Maintenance Manual

8.4 Control surface seals and turbulators

25.4 mm= 1 in., 1 m = 3.2809 ft.
1. Wings - upper surface
30003125 Mylar seal 0.19 x 22 mm without glue, curved
70000253 Tesafix No. 4965, 9 mm wide, 50 m roll glue film
70000229 Tesafilm 4104 white, 19 mm wide, 66 m roll PVC tape
2. Wings - lower surface
30003300 Noppenband 10m roll (dimple turbulator tape)
3. Ailerons (sliding surface and internal seal)
30003136 Teflon-glass fabric 0.08 x 38 mm, 33 m roll selfadhesive
70000229 Tesafilm 4104 white, 19 mm wide, 66 m roll PVC tape
4. Horizontal tailplane
30003129 Zig-zag turbulatortape 60 degree 0.4 mm thick
30003125 Upper surface: Mylar seal 0.19 x 22 mm without glue, curved
30003124 Lower surface: Mylar seal 0.19 x 22 mm without glue, flat
70000253 Tesafix No. 4965, 9 mm wide, 50 m roll glue film
70000229 Tesafilm 4104 white, 19 mm wide, 66 m roll PVC tape
5. Vertical tailplane
30003142 Zig-zag turbulatortape 60 degree 0.8 mm thick
30003128 Mylar seal 0.19 x 30 mm without adhesive, curved, leading edge
scarfed
70000253 Tesafix No. 4965, 9 mm wide, 50 m roll glue film
70000229 Tesafilm 4104 white, 19 mm wide, 66 m roll PVC tape
70000295 Internal seal: 3M Scotch V-seal weatherstrip Cat.Nr.2101
5.2 m roll
Issued: January 2007
Maintenance Manual DG-1000T
TN1000/10 8.4