TVLogic LVM-170A Operation Manual page 10

3. Controls & Functions
LVM-170A : REAR
[HDMI(HDCP)] (HDMI)
●
- Signal input terminal for HDMI signal.
[CVBS] (BNC)
●
- Signal input terminal for COMPOSITE signal.
[SDI-IN A] (BNC)
●
- Signal input terminal for 3G/HD/SD SDI
signal.
[SDI-IN B] (BNC)
●
- Signal input terminal for 3G/HD/SD SDI
signal.
[SDI-OUT] (BNC)
●
- Signal output terminal for 3G/HD/SD SDI
input signal through SDI-IN.
[LAN]
●
- Supports TVLogic's control program.
[Audio in] (PHONE JACK)
●
- Inputs external audio.
[RS422 IN/OUT] (RJ-45)
●
- Controls the monitor by a protocol provided
by TVLogic or supports TSL protocol.
10 Multi Format LCD Monitor
~ AC IN
●
- 100 ~ 240V AC 50/60Hz
DC 12V/24 IN
●
- 12V /24V DC
DC IN socket
1,2 : GND
3,4 : +12V / +24V
<WARNING!!>
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel.
And the connected devices such as camera
or video source player may also be infl uenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.