TVLogic LVM-170A Operation Manual
  1. Manuals
  2. Brands
  3. TVLogic Manuals
  4. Lcd monitor
  5. LVM-170A
  6. Operation manual

TVLogic LVM-170A Operation Manual

Multi format broadcast lcd monitor
Hide thumbs Also See for LVM-170A:
Table of Contents

Advertisement

Quick Links

Download this manual
Multi Format Broadcast
LCD Monitor
LVM-170A
LVM-176W
LVM-182W-A
LVM-232W-A
LVM-246W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LVM-170A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TVLogic LVM-170A

Summary of Contents for TVLogic LVM-170A

  • Page 1 Multi Format Broadcast LCD Monitor LVM-170A LVM-176W LVM-182W-A LVM-232W-A LVM-246W...

  • Page 2: Table Of Contents

    Contents 1. Caution 2. Main Features 3. Controls & Functions 4. Menu Organization & Adjustment 5. Menu Operations [1] PICTURE [2] COLOR [3] MARKER [4] GPI/UMD [5] WAVEFORM [6] AUDIO [7] DISPLAY & SET 6. Firmware Upgrage 7. Button Functions 8.

  • Page 3: Caution

    ● voltage and other dangerous conditions. according to the method recommended by the Sudden stops, excessive force and uneven floor LVM-170A : DC 12/24V(MAX 6A) ● Request a qualified service person to perform manufacturer. surface can cause the product to fall from the LVM-176W : DC 12/24V(MAX 6A) ●...

  • Page 4: Main Features

    2. Main Features 3. Controls & Functions LVM-170A/176W/182W-A/232W-A/246W Monitors contain the following features: LVM-170A : FRONT Compatible with varied SDI signals 1:1 SCAN / Zoom ● ● - The product is compatible with varied - Outputs the original signal image on the SD/HD/3G(A/B)-SDI 480i,576i,720p,1080i/p, screen without scaling.
  • Page 5 3. Controls & Functions 3. Controls & Functions LVM-170A : FRONT LVM-170A : FRONT [USB] [F1 ~ F5] Button/Lamp [MARKER] Button/Lamp [MENU/EXIT] Button/Lamp ● ● ● ● - Updates new firmware and color calibration. - Performs the function that the user set as - Used to activate/deactivate the Marker.
  • Page 6 MARKER power source and the power extender or [RS422 IN/OUT] (RJ-45) LVM-176W : REAR ● power distributor is grounded. - Controls the monitor by a protocol provided by TVLogic or supports TSL protocol. HDMI HDMI CVBS1/G/Y/S-Y CVBS1/G/Y/S-Y CVBS2/B/Pb CVBS2/B/Pb CVBS3/R/Pr/S-C...
  • Page 7 3. Controls & Functions 3. Controls & Functions LVM-176W : FRONT LVM-176W : FRONT [OPERATE] Lamp [MARKER] Button/Lamp [MENU] Button/Lamp [APERTURE] Knob ● ● ● ● - Indicates the status of power connection and - Used to activate/deactivate the Marker. - Activates OSD menu.
  • Page 8 [RS422 IN/OUT] (RJ-45) [USB] ● ● - Controls the monitor by a protocol provided - Updates new firmware and color calibration. by TVLogic or supports TSL protocol. ~ AC IN ● [DVI-I] (DVI-I) - 100 ~ 240V AC 50/60Hz ●...
  • Page 9 3. Controls & Functions 3. Controls & Functions LVM-182W-A/232W-A : FRONT LVM-182W-A/232W-A : FRONT [STATUS INDICATOR] Lamp [SCAN] Button/Lamp [H/V DELAY] Button/Lamp [MENU/EXIT] Button/Lamp ● ● ● ● - Used to display the current input mode. - Used to change the scan mode. Press the - Used to check horizontal sync.
  • Page 10 [RS422 IN/OUT] (RJ-45) DC 12/24V IN ● - Controls the monitor by a protocol provided - LVM-182W-A : 24V by TVLogic or supports TSL protocol. - LVM=232W-A : 12V/24 DC [DVI-I] (DVI-I) ● - Signal input terminal for DVI ANALOG or DVI DC IN socket DIGITAL signal.
  • Page 11 3. Controls & Functions 3. Controls & Functions LVM-246W : FRONT LVM-246W : FRONT [STATUS INDICATOR] Lamp [F1 ~ F4] Button/Lamp [APERTURE] Knob [USB] ● ● ● ● - Used to display the current input mode. - Performs the function that the user set as - Used to adjust the picture sharpness.

  • Page 12: Menu Organization & Adjustment

    - Controls the monitor by a protocol provided - 100 ~ 240V AC 50/60Hz 3. After selecting a sub menu, press ENTER to by TVLogic or supports TSL protocol. select an item with the UP/DOWN button. DC 12V IN 4. Press ENTER to select the desired item ●...

  • Page 13: Menu Operations

    5. Menu Operations 5. Menu Operations [1] PICTURE [1] PICTURE (DVI ANALOG) NTSC Setup ● - The item sets NTSC IRE value for 0(Zero setup) or 7.5 IRE. - It is activated in COMPOSITE 1/2/3 or S-VIDEO only NTSC signal is input. Key Lock ●...

  • Page 14: Color

    5. Menu Operations 5. Menu Operations [2] COLOR [3] MARKER [3] MARKER Color Temp Marker Fit Marker USER Marker H1 ● ● ● ● - The item controls color temperature and - The item selects the marker type when the - The item activates the FIT MARKER function.

  • Page 15: Gpi/Umd

    - The item sets the ID of each monitor for the 2.35:1 MARKER, PIN 2 : SDI-B Channel - The selectable items are [Small] and [Large]. TVLogic control protocol or DYNAMIC UMD 1.85:1 & 4:3 MARKER PIN 3 : HDMI Channel using RS-422/485 communication.
  • Page 16 (Not used) COLOR. bit 7 : cleared to 0 (Not used) * Default : Original TVLogic managing method (VRT) * [DISPLAY DATA] : 16 displayable ASCII characters. * User color : Each user can set each tally color. - When user color is selected, TALLY1 COLOR ~ TALLY4 COLOR items are activated.

  • Page 17: Waveform

    5. Menu Operations 5. Menu Operations [4] GPI / UMD [5] WAVEFORM Waveform Intensity Tally Type - Default ● ● - The item controls the brightness of the WAVEFORM/VECTOR display. - S-8C(Single 8 Character) & S-16C(Single 16 Character) - Available values are between 1 ~ 63. The higher the number the brighter the Bit 1 Bit 1...
  • Page 18 5. Menu Operations 5. Menu Operations [5] WAVEFORM [5] WAVEFORM Luma(Y’) Zone Check C Max ● ● - Analyzes Luma (Y’) of input signal and - Sets the max. value of Chroma (C’) between displays the analyzed area on the screen. 0~255.

  • Page 19: Audio

    5. Menu Operations 5. Menu Operations [6] AUDIO [6] AUDIO (LVM-170A) Level Meter Group Loudness log time ● ● - Used to set the level meter group. - Used to set the log time. - Available modes are as below.

  • Page 20: Display & Set

    5. Menu Operations 5. Menu Operations [7] DISPLAY & SET [7] DISPLAY & SET Key LED TimeCode Enable ● ● - The item turns on / off LED in front of the - The item sets timecode. monitor. - Available modes are OFF, VITC and LTC. - Even though you turn off KEY LED, when you Focus Assist press LED button in front of the monitor, the...

  • Page 21: Firmware Upgrage

    * During the update, the monitor screen is off, and nothing functions. * After the update, TVLogic logo shows up on the screen, and the monitor initializes. * Update can take 10~20min. depending on firmware kind.

  • Page 22: Button Functions

    #If no image displays after selecting the #If no image displays after selecting the that your connection is not lose or <LVM-170A/182W-A/232W-A> desired input mode, check and make sure desired input mode, check and make sure disconnected.

  • Page 23: Other Functions

    <LVM-182W/232W> DOWN DOWN <CENTER> <TOP LEFT > <TOP RIGHT > <LVM-170A> DOWN DOWN <BOTTOM RIGHT > <BOTTOM LEFT > <Position Change in 1:1 SCAN > <LVM-246W> 44 Multi Format LCD Monitor...
  • Page 24 * Full waveform(Y) : Displays the Waveform(Y) resolution into 2.35:1 aspect ratio, adjust the to full screen. - Control range for width : width and height as LVM-170A : 1920X817, * Full Vectorscope : Displays the Vectorscope LVM-170A : Min[100] ~ Max[1920] LVM-176W/182W-A : 1366X582, LVM-232W-A to full screen.
  • Page 25 * LVM-176W/182W-A : Min 0, Max 768 performance in setting the exposure of <ZOOM OFF> - This function is designed for better * LVM-170A/LVM-232W-A/246W : Min 0, Max lighting when shooting with vDSLR cameras. performance in setting the exposure of 1080 lighting when shooting with vDSLR cameras.
  • Page 26 8. Other Functions [7] FOCUS ASSIST [8] RANGE ERROR [9] INTERNAL PATTERN [10] INFO. (LVM-170A/182W-A/232W-A) Focus Assist function assigns a color to Pixels with Y’ or C’ levels exceeding the Displays internally generated test Displays current status and function ●...

  • Page 27: Dvi / Hdmi Support Resolution

    8. Other Functions 9. DVI / HDMI Support Resolution DVI ANALOG / DIGITAL /HDMI SUPPORT RESOLUTION (LVM-176W/182W-A) [11] Loudness The purpose of loudness control in programme exchange, in order to be uniform for DVI-ANALOG mode supports the following modes : ●...

  • Page 28: Product Specifications

    10. Product Specifications 9. DVI / HDMI Support Resolution DVI ANALOG / DIGITAL /HDMI SUPPORT RESOLUTION (LVM-170A/232W-A/246W) LVM-170A Size 7.3” Resolution 1920 X 1080 (16:9) DVI-ANALOG mode supports the following modes : ● Pixel Pitch 0.199(H) X 0.199(V) mm Color Depth 16.7M (8bit-D)
  • Page 29 10. Product Specifications 10. Product Specifications LVM-176W LVM-182W-A Size 16.84” Size 18.5” Resolution 1366 X 768 (16:9) Resolution 1366 X 768 (16:9) Pixel Pitch 0.273(H) X 0.273(V) mm Pixel Pitch 0.300(H) X 0.300(V) mm Color Depth 16.7M (True 8bit) Color Depth 16.7M (Dithered 8bit) Viewing Angle H : 178 degrees / V : 178 degrees...
  • Page 30 10. Product Specifications 10. Product Specifications LVM-232W-A LVM-246W Size 23” Size 24.1” Resolution 1920 X 1080 (16:9) Resolution 1920 X 1200 (16:10) Pixel Pitch 0.265(H) X 0.265(V) mm Pixel Pitch 0.270(H) X 0.270(V) mm Color Depth 16.7M (Dithered 8bit) Color Depth 16.7M (Dithered 8bit) Viewing Angle H : 178 degrees / V : 178 degrees...

  • Page 31: Optional Accessories

    11. Optional Accessories MEMO RACK MOUNT ANY DISPLAY UP TO 24” 8.4 inch 9 inc h 7 inch 15 inch 17 inch 21 inch 24 inch 60 Multi Format LCD Monitor Multi Format LCD Monitor 61...
  • Page 32 MEMO 62 Multi Format LCD Monitor...
  • Page 33 FOR MORE INFORMATION PLEASE VISIT : http://www.tvlogic.tv 12F, ACE HIGH-END 8, 84 Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-802, KOREA 부사장 TEL : +82-70-8668-6611, FAX : 82-2-6123-3201, E-mail : sales@ t vlogic.co.kr 조 성 일 153-802 서울특별시 금천구 가산동 345-4 에이스하이엔드 8차 12층...

This manual is also suitable for:

Lvm-176wLvm-182w-aLvm-232w-aLvm-246w

Table of Contents