Table of Contents
Advertisement
*2 SOURCE channels corresponding to CH1-8 will be the default value.
If Input Selection is set to Direct Input Selection, the settings will be; CH1: Source CH1 -
CH8: Source CH8.
If Input Selection is set to Dolby Decoder Output, the settings will be; CH1: Dolby DEC 1 -
CH8: Dolby DEC 8.
Dolby Encoder Mode Setting
Parameter
Default
Program
5.1+2
Configuration
Bit Depth
20bit
Frame REF
CONV1
Meta Data
Internal
Input
*1 If Bit Depth is set to 16bit, the "＊" is displayed and the program functions as 5.1. To set to
the above program configurations, set Bit Depth to 20bit.
*2 See section 9-2-6 Converter1 for details on CONV1 and CONV2 settings.
Setting range
*1
5.1+2
*1
5.1+2x1
*1
4+4
*1
4+2x2
*1
4+2+2x1
*1
4+4x1
*1
4x2
*1
3x2+2x1
*1
2x2+4x1
*1
2+6x1
*
8x1
1
5.1
4+2
4+2x1
3x2
2x2+2x1
2+4x1
6x1
4
2+2
2+2x1
4x1
*1
7.1
*1
7.1 Screen
20bit
16bit
CONV1
CONV2
Internal
Dolby Decoder Output
190
Description
Selects Dolby E encoder program
*1
configuration.
Selects the bit width of the Dolby E
encoder output.
Selects a video output to which the
Dolby E encoder output is
synchronized. (Converter 1 or
*2
converter 2)
Selects a metadata to be used for
Dolby E encoding.
Internal: Uses Program
Configuration and Bit Depth settings.
Other metadata will be reset to
default.
Dolby Decoder Output: Uses the
metadata of the Dolby E signal input
to the Dolby decoder. The program
configuration and bit depth settings
will be ineffective.
Advertisement
Table of Contents
