FOR-A FA-9500 Operation Manual page 173

 Converter2 Crop
Parameter
H Left
H Right
V Top
V Bottom
The Converter2 Crop setting cannot be changed if Converter2 Process Mode is set to
BY-PASS. Also, it cannot be changed if the conversion is set to the formats indicated as
(BY-PASS) in the CONV2 Conversion Table (5-4-2).
*1 The Converter2 Crop setting range varies depending on the Converter2 Size, Converter2
Position, and Sync Format settings in FS Mode (9-4-1 Video System).
The cropping setting range resets itself if the video input changes. If the set value
exceeds the setting range due to an input change, the set value will automatically
reset itself to the default value. If the set value exceeds the horizontal range, the H Left
and H Right settings will reset to their default values. If the value exceeds the vertical
range, the V Top and V Bottom settings will also reset accordingly.
 Converter2 Side Cut Color
Parameter
Red, Green, Blue
The Converter2 Side Cut Color setting cannot be changed if Converter2 Process Mode is set
to BY-PASS. Also, it cannot be changed if the conversion is set to the formats that are
indicated as (BY-PASS) in the CONV2 Conversion Table (5-4-2).
Setting range
Default
(Steps)
*1
Variable
0 Pixel
(2 Pixel)
Variable *1
0 Pixel
(2 Pixel)
*1
Variable
0 Line
(1 Line)
Variable *1
0 Line
(1 Line)
IMPORTANT
Default Setting range
0 0 - 255
157
Description
Crops the left side of the video.
Crops the right side of the video.
Crops the top of the video.
Crops the bottom of the video.
Description
Sets background color that will be visible if
the converted image is set smaller than
the original under Converter2 Size
(5-4-3).
R, G, and B components can be adjusted
separately.