Table of Contents
Advertisement
Converter1 Crop
Parameter
H Left
H Right
V Top
V Bottom
The Converter1 Crop setting cannot be changed if Converter1 Process Mode is set to
BY-PASS. Also, it cannot be changed if the conversion is set to the formats indicated as
(BY-PASS) in the CONV1 Conversion Table (5-3-2).
*1 The Converter1 Crop setting range varies depending on the Sync Format settings in FS
Mode (9-4-1 Video System).
The cropping setting range resets itself if the video input changes. If the set value
exceeds the setting range due to an input change, the set value will automatically
reset itself to the default value. If the set value exceeds the horizontal range, the H Left
and H Right settings will reset to their default values. If the value exceeds the vertical
range, the V Top and V Bottom settings will also reset accordingly.
Converter1 Side Cut Color
Parameter
Red, Green, Blue
The Converter1 Side Cut Color setting cannot be changed if Converter1 Process Mode is set
to BY-PASS. Also, it cannot be changed if the conversion is set to the formats indicated as
(BY-PASS) in the CONV1 Conversion Table (5-3-2).
Default
Setting range (Steps)
Variable
0 Pixel
(2 Pixel)
Variable
0 Pixel
(2 Pixel)
Variable
0 Line
(1 Line)
Variable
0 Line
(1 Line)
IMPORTANT
Default
Setting range
0
0 - 255
153
Description
*1
Crops the left side of the video.
*1
Crops the right side of the video.
*1
Crops the top of the video.
*1
Crops the bottom of the video.
Description
Sets background color that will be visible if the
converted image is set smaller than the original
under Converter1 Size (5-3-3).
R, G, and B components can be adjusted
separately.
Control knob F4 allows you to adjust R, G, and
B at the same time.
Advertisement
Table of Contents
