Table of Contents
Advertisement
Auto channel pairing example (on non-PCM inputs):
Conditions:
non-PCM inputs in Source 1 and 2
PCM inputs in Source 3 through 16
Entered value in SDI
Audio Remapping
CH1: Source1
CH2: Source2
CH1: Source3
CH2: Source5
CH1: Source1
CH2: Source1
CH1: Source2
CH2: Source2
CH1: Source4
CH2: Source2
CH1: Silence
CH2: Source2
CH1: 500Hz
CH2: Source2
CH1: Down Mix-L
CH2: Source3
CH1: Down Mix-L
CH2: Source2
CH1:Dolby Encoder 1
CH2:1KHz
Assigned Source display
CH1: Source1
CH2: Source2
CH1: Source3
CH2: Source5
CH1: Source1
CH2: ＊Source2
CH1: ＊Source1
CH2: Source2
CH1: ＊Source3
CH2: ＊Source4
CH1: Silence
CH2: ＊Silence
CH1: 500Hz
CH2: ＊500Hz
CH1: Down Mix-L
CH2: Source3
CH1: Down Mix-L
CH2: ＊ Down Mix-R
CH1:Dolby Encoder 1
CH2: ＊Dolby Encoder 2
179
Auto channel pairing
CH1: Source1
CH2: Source2
Unchanged. The selected L/R channels are
a correct non-PCM channel pair.
CH1: Source3
CH2: Source5
Unchanged. The selected L/R channels are
PCM audio signals.
CH1: Source1
CH2: Source2
Changed to make a proper pair including the
assigned L channel signal. The selected L/R
channels are the same channel of a
non-PCM channel pair.
CH1: Source1
CH2: Source2
Changed to make a proper pair including the
assigned L channel signal. The selected L/R
channels are the same channel of a
non-PCM channel pair.
CH1: Source3
CH2: Source4
Changed to make a proper pair including the
assigned L channel signal. PCM and
non-PCM signals are selected for L/R
channels.
CH1: Silence
CH2: Silence
Changed to make a proper pair including the
assigned L channel signal. SILENCE and
non-PCM signals are selected for L/R
channels.
CH1: 500Hz
CH2: 500Hz
Changed to make a proper pair including the
assigned L channel signal. 500Hz and
non-PCM signals are selected for L/R
channels. (1kHz signal will be processed the
same.)
CH1: Down Mix-L
CH2: Source3
Unchanged. Down Mix-L and PCM signals
are selected for L/R channels.
CH1: Down Mix-L
CH2: Down Mix-R
Changed to make a proper pair including the
assigned L channel signal. Down Mix-L and
non-PCM signals are selected for L/R
channels.
CH1: Dolby Encoder 1
CH2: Dolby Encoder 2
Changed to make a proper pair including the
assigned L channel signal. NON-PCM and
1KHz signals are selected for L/R channels.
Advertisement
Table of Contents
