FOR-A FA-9500 Operation Manual page 203

 Dolby Decoder REF Input Select
Parameter Default
REF Input AUX REF IN
 Dolby Down Mix Mode
Parameter
Mode Surround
 Dolby Decoder Gain
Parameter
Master
 Dolby Decoder Gain Set
Parameter
CH 1-8
Down Mix L CH
Down Mix R CH
*1 The total Master and individual channel gain setting value cannot exceed the above setting
range.
Setting range
Output Video
AUX REF In
Input Video
Default Setting range
Surround
Stereo
Monaural
Setting range
Default
(Steps)
-20.0 - +20.0 dB
0.0 dB
(0.1 dB)
Setting range
Default
(Steps)
-20.0 - +20.0 dB*1
0.0 dB
(0.1 dB)
187
Description
Selects a reference signal to be used in the
Dolby decoder. PCM signal output from the
Dolby decoder will be synchronized to the
selected reference signal.
Output Video: Uses the output video signal.
AUX REF In: Uses the input signal in the
optional Dolby reference input connector (REF
IN). If no signal is in the REF IN connector, the
PCM signal output will be in free-run mode.
Input Video: Uses the input video signal as a
reference signal.
Description
Selects a downmix mode for the
Dolby decoder.
Description
Sets offset for all Dolby-decoded
signals.
Description
Sets gain for each Dolby decoder
channel.