FOR-A FA-9500 Operation Manual page 171

 Aspect Ratio
Parameter Default
AFD(4:3)
Aspect Ratio
AFD
The Aspect Ratio setting cannot be changed if Converter2 Process Mode is set to BY-PASS.
*1 BT1119 WSS will be embedded according to the WSS AFD ERROR settings (Sec.
5-10-19) for the non-WSS aspect ratio conversions.
 Motion Sense
Parameter Default
Motion Sense
Adaptive
*1
*1 The Motion Sense setting is common for Converters 1 and 2. Setting Motion Sense
to Frame (Odd 1st) or Frame (Even 1st) for input signals other than progressive
segment frame inputs causes motion artifacts to appear. In such case, change the
Motion Sense setting to Field or Adaptive.
Setting range
AFD(4:3) Selects the aspect ratio for the output from
AFD-ALT(4:3) Converter2.
AFD(16:9) Selectable aspect ratio settings when
AFD-ALT(16:9) Converter 2 is set to SD.
4:3 L 16:9 T AFD(4:3), AFD-ALT(4:3), AFD(16:9),
4:3 L 14:9 T AFD-ALT(16:9) automatically select an
4:3 L>16:9 aspect ratio according to the AFD data in the
4:3 F 4:3 input signal. If no AFD data is found in the
4:3 L 16:9PRTD input signal, the aspect ratio will be
4:3 L 14:9 determined according to the setting made
4:3 F ALT14:9 under 5-10-18 ANC LOSS SET.
*1
4:3 L ALT14:9 To output video signals in 4:3, select either
*1
4:3 L ALT 4:3 ratio with (4:3). To output in 16:9, select
16:9 L>16:9 either ratio with (16:9). Other options will
*1
16:9 F 16:9 output video signals in the specified aspect
16:9 P 4:3 ratio. See section 20 "About AFD" for details.
*1
16:9 F PRTD Options (4:3 L 16:9 T to 16:9 F ALT 4:3)
*1
16:9 P 14:9 other than the above four require the input
*1
16:9 P ALT 14:9 signal aspect ratio to be specified in SD
*1
16:9 F ALT14:9 INPUT ASPECT (5-7-2) if the input signal is
*1
16:9 F ALT4:3 an SD signal.
Selectable aspect ratios when Converter 2 is
AFD set to 1080i, 720p, 1080PsF, or 1080(3G).
AFD-ALT AFD and AFD-ALT automatically select an
16:9 L>16:9 aspect ratio according to the AFD data in the
16:9 F 16:9 input signal. If no AFD data is found in the
16:9 P 4:3 input signal, the aspect ratio will be
16:9 F PRTD determined according to the setting made
16:9 P 14:9 under ANC LOSS SET (Sec. 5-10-18).
16:9 P ALT14:9 Options other than the above two output in
16:9 F ALT14:9 the specific aspect ratio. See section 20
16:9 F ALT4:3 "About AFD" for details on conversions
according to AFD data.
Setting range
(Steps)
Field: Generates a progressive scan image from
one field of an interlaced scan image.
The created image has no motion artifacts, but
vertical resolution will be reduced.
Adaptive:
Field
Detects whether there is motion or no motion in
Adaptive
the scene, and generate an optimal progressive
scan image.
Frame(Odd
Frame(Odd 1st):
1st)
Generates a progressive scan image from two
Frame(Even
fields (odd/even) of and interlaced scan image.
1st)
Suitable for the progressive segment frame input
of progressive scan signals.
Frame(Even 1st):
Generates a progressive scan image from two
fields (even/odd) of interlaced scan image.
IMPORTANT
155
Description
Description