Xcommand Phonebook Contactmethod Add; Xcommand Phonebook Contactmethod Delete - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xCommand Phonebook ContactMethod Add

Add contact details for an existing contact in the local phonebook. The command returns the
ContactMethodId, which is a unique string that identifies the contact method; typically the
format is "n".
You can add several contact methods to a contact. Note that only the first contact method
will appear in the Favorites list on the Cisco TelePresence Touch controller. The first contact
method may have been created when issuing the xCommand Phonebook Contact Add
command to make the contact. All contact methods are available in the API, on the web inter-
face and when using the remote control.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook ContactMethod Add ContactId: "ContactId" [Device: Device]
Number: "Number" [Protocol: Protocol] [CallRate: CallRate] [CallType: CallType]
where
: String (0, 255)
ContactId
The unique identifier for the contact that you want to add a contact method to. The
identifier will be returned by an xCommand Phonebook Search command. It was also
returned when the xCommand Phonebook Contact Add command was issued to make
the contact.
: Mobile/Other/Telephone/Video
Device
Set which type of device to call to.
: String (0, 255)
Number
The phone number or address of the contact.
: Auto/H320/H323/SIP/Spark
Protocol
Select protocol.
: Integer (0..6000)
CallRate
Set a call rate.
: Audio/Video
CallType
Select a call type (audio or video).
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration xCommand xCommand

xCommand Phonebook ContactMethod Delete

Delete a contact method from an existing contact in the local phonebook.
Requires user role: ADMIN, USER
USAGE:
xCommand Phonebook ContactMethod Delete ContactId: "ContactId" ContactMethodId:
"ContactMethodId"
where
: String (0, 255)
ContactId
The unique identifier for the contact you want to change. The identifier will be returned
by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook Contact Add command was issued to make the contact.
: String (0, 255)
ContactMethodId
The unique identifier for the contact method you want to delete. The identifier will be
returned by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook ContactMethod Add command was issued to make the contact
method.
107
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.