Fingerprint Reader (Fpr) - Elo TouchSystems 15D1 User Manual

T 15D1 U
OUCHCOMPUTER
Testing the Customer Display
To test the customer display, follow these steps:
Double-click the VFD Test icon.
1.
Select the correct COM port (refer to Device Manager).
2.
Enter a line of text into the Text: field.
3.
Click Initialize.
4.
Verify that the device shows the line of text entered.
5.

Fingerprint Reader (FPR)

The fingerprint reader is powered by the USB bus. The reader optically scans the
fingerprint when the user touches the glowing window. Optical technology gives the
highest quality fingerprint scans and reliability.
Partial fingerprint reader specifications are shown in the table below.
Feature
Fingerprint reader
Power supply
Current draw – scanning mode
Current draw – idle mode
Current draw – suspend mode
Image resolution
Image color
Scan capture size
Image capture speed
G
SER UIDE
A
DDING
Specification
DigitalPersona U.are.U 4000B
5.0VDC +/- 0.25V
190 mA (typical)
140 mA (typical)
1.5 mA (typical)
512 dpi
8-bit gray level
14.6mm (nominal width) x 18.1mm (nominal length)
100 ms
O P
PTIONAL ERIPHERALS
20