Securing The Base; Advertising Brackets - Elo TouchSystems 15D1 User Manual

Securing the Base

Advertising Brackets

T 15D1 U
OUCHCOMPUTER
There are two mounting options for the 15D1 touchcomputer. In both cases, the base
must be mounted on a horizontal surface.
Option 1: Secure from below. Use the four pretapped holes to secure the four m6
◆
screws from below the mounting surface.
Option 2: Secure from top. Use the two through holes to secure the base to the
◆
surface.
N : Mounting screws are not provided with the shipment.
OTE
Refer to the figure below for the location of the holes. All dimensions are in millimeters
Advertising brackets are provided to allow the user to display ads on the back of the
15D1 touchcomputer. These brackets are included separately in the accessory box. The
maximum size of the advertising material is 220mm X 320mm (8.6" X 12.6").
To install these brackets, simply push them onto the back door of the 15D1
touchcomputer, as shown in the figure below.
G
SER UIDE
Option 2 through holes
Option 1 Pretapped holes
S B
ECURING THE ASE
.
7