Elo TouchSystems 15D1 User Manual page 28

T 15D1 U
OUCHCOMPUTER
Testing the Barcode Scanner
Determine which port the barcode scanner is using:
1.
a. In the Windows Control Panel, start the Computer Management application.
b. In Computer Management, select Device Manager. In the right pane, look under
the Ports section, and note the COM value of the USB-Serial Port object.
Double-click the Barcode Scanner Test icon to start the following application:
2.
Change the port value to match the value you retrieved from the Device Manager.
3.
Click Connect. You should see the text connected in the Messages field.
4.
In the box labeled Param Number, enter the value 238.
5.
In the box labeled New Value enter the value 1.
6.
Check the box labeled Permanent Param Change.
7.
Scan a barcode (sample given below). The scanned data should appear in the
8.
"Messages" section of SSIContainer.
G
SER UIDE
A O P
DDING PTIONAL ERIPHERALS
23