Wireless Card - Elo TouchSystems 15D1 User Manual

T 15D1 U
OUCHCOMPUTER
The barcode scanner also has the ability to run in USB-KB emulation mode. To enable
this option, please install the required drivers. To find the drivers:
Click the 15D1 Setup Files folder on the Desktop.
1.
Then click the Barcode Scanner folder.
2.
Finally, click the Keyboard Emulation Setup Files folder, where you can find setup
3.
instructions to complete the installation process.

Wireless Card

A wireless card can be installed as an option in the 15D1 touchcomputer to provide
wireless LAN capabilities using a miniPCI slot. A PCI to miniPCI converter board is
provided in the wireless kit.
Typical specifications for the wireless card are:
MiniPCI interface
◆
Compliant to MiniPCI industry-standard sizing
◆
802.11b/g compliant
◆
Two UFL connectors
◆
Support for Windows 2000, Windows XP, and Windows Vista 32
◆
RoHS compliant
◆
Elo P/N E238795
◆
Testing the Wireless Card
To test the wireless card:
From the desktop, click Start > Control Panel > Network Connections.
1.
Double-click the Wireless Network Connections icon to display available
2.
networks and verify that the wireless network is detected.
N : If a wireless network needs to be initialized, please see your system
OTE
administrator.
G
SER UIDE
A O P
DDING PTIONAL ERIPHERALS
24