Osd And Power Button Control; Led Functionality; Base Power Status Led; Head Power Status Led - Elo TouchSystems 15D1 User Manual

LED Functionality

T 15D1 U
OUCHCOMPUTER
Feature Description
Miscellaneous Adjusts sharpness, enables/disables DDCCI function.
Sharpness: Adjusts sharpness of video.
Exit Exits the OSD.

OSD and Power Button Control

The OSD menu and power button are enabled by default.
To enable or disable the OSD function:
Simultaneously press Menu/Exit and the Left (<-) key for two seconds. A window
1.
appears displaying OSD ENABLE or OSD DISABLE.
When the OSD is disabled, the OSD menu is not visible.
2.
To enable or disable the power button lock function:
Simultaneously press Menu/Exit and the Right (->) key for two seconds. A window
1.
appears displaying PWR ENABLE or PWR DISABLE.
When the power button lock feature is activated, the power button is disabled.
2.

Base Power Status LED

The 15D1 base has two LEDs that indicate the power status and hard drive status. See
the figure on page 9, item 1 for the location of this LED. The light can be green, flashing
green, red, or off. The table below shows LED state and corresponding color.
LED Color to Observer
Off
Red
Flashes green
Green

Head Power Status LED

The head power status is indicated by a different LED, which is located at the lower edge
of the head (#3 in figure on page 9).
G
SER UIDE
State
No input power — Off mode
Input power present, power switch off — Off mode
Input power present — Sleep mode
Input power present — On mode
LED F
UNCTIONALITY
11