Configuring Sdr Listener Support; Enabling Sdr Listener Support (Cli) - Cisco Catalyst 3850 series Configuration Manual

Configuring Optional IP Multicast Routing Features
Command or Action
Step 6
end
Example:
Device(config)# end
Step 7 show running-config
Example:
Device# show running-config
Step 8 copy running-config startup-config
Example:
Device# copy running-config
startup-config
Related Topics
Multicast Boundaries, on page 131
Example: Defining the IP Multicast Boundary to Deny Auto-RP Information, on page 183
IP Multicast Boundary, on page 24
Multicast Group Transmission Scheme, on page 22
Example: Configuring an IP Multicast Boundary, on page 305

Configuring sdr Listener Support

Enabling sdr Listener Support (CLI)

By default, the device does not listen to session directory advertisements.
This procedure is optional.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. ip sap listen
5. end
6. show running-config
7. copy running-config startup-config
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
298
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Configuring Basic IP Multicast Routing
OL-32598-01