Table of Contents
Advertisement
Technical Instructions
Document No. LV3-1000
Section 8-2: Software Installation
The following steps outline the procedure for installing the ACS410 software on a PC.
1. The ACS410 software can be downloaded from the SCC website:
a. Go to www.scccombustion.com/lmv3.htm.
b. Click on "ACS410 Software (21MB)" towards the bottom to begin the download.
2. Once the ACS410 software has been downloaded, double-click on the setup.exe file. This
should start the installation. Pick the desired options as the installation prompts:
a. Select the installation language and click "OK".
b. When prompted, click "Next".
c. Accept the license agreement and click "Next".
d. Select the folder where the ACS410 software will be installed. The default folder is
C:\Program Files (x86)\Siemens\ACS410. Click "Next".
e. Select the folder where the ACS410 software shortcuts will be installed in the Start
Menu. The default folder is ACS410. Click "Next".
f. Select the checkbox if an ACS410 desktop icon is desired. Click "Next".
g. Review the installation choices. If everything looks correct, click "Install".
h. The ACS410 software will now be installed on the PC.
3. Once the ACS410 software installation is complete, a prompt to install the OCI410 device
drivers will appear. Perform the following steps to install these drivers:
a. Click "Next".
b. The OCI410 drivers will now be installed.
c. Once the OCI410 drivers have been installed successfully, click "Finish".
d. Select the checkbox if it is desired for ACS410 to launch immediately, then click "Finish".
4. At this point, the ACS410 software is ready to run.
Section 8
Page 2
LMV Series
SCC Inc.
Hide quick links:
Advertisement
Table of Contents
