Oil Firing Rate Control Valve - Siemens LMV3 series Technical Instructions

Hide thumbs Also See for LMV3 series:
Table of Contents

Advertisement

LMV Series
Pre-built valve actuator assemblies are available that mount an SQM33... actuator to a VKF...
gas butterfly valve. A variety of VKF... valves are available from 1-1/2" to 8". The most
common assemblies are listed below. For more information about VKF... valves, refer to
Document No. CVLV-1000. For more information about valve actuator assemblies using VKF...
valves, refer to Document No. VA-3000.
Valve Actuator Assemblies – Qty (1) Required if Firing Oil (Not Using a Cleaver Brooks Oil Valve)
Pre-built valve actuator assemblies are available to mount an SQM33... actuator to a Hauck S or
AS series oil valve. For more information about valve actuator assemblies using Hauck oil
valves, refer to Document No. VA-4000.
When retrofitting a Cleaver Brooks boiler, the following kit is available for the oil metering
valve. Refer to Document No. CPBK-5000 for technical information or Document No. CPBK-
5100 for installation instructions.
SCC Inc.
Gas Firing Rate Control Valve (continued)
SQM33 to 3" VKF butterfly valve
VA33-3.0VKF
SQM33 to 4" VKF butterfly valve
VA33-4.0VKF
SQM33 to 6" VKF butterfly valve
VA33-6.0VKF

Oil Firing Rate Control Valve

Valve actuator assemblies mounting an SQM33...
VA33...
actuator to a Hauck oil valve
Cleaver Brooks Oil Valve Retrofit Kit - Optional
Bracket for mounting an SQM33... actuator to a
BR-45CBOIL
Cleaver Brooks oil metering valve
Page 9
Technical Instructions
Document No. LV3-1000
Section 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents