Lmv3 System Builder; Control Panel Components - Siemens LMV3 series Technical Instructions

Technical Instructions
Document No. LV3-1000
Section 1-2: LMV3 System Builder
The LMV3 Linkageless Burner Management System is comprised of many components in
addition to the LMV3 itself. Use the following pages to choose the components needed for
your specific application. See pages 13 and 15 for an LMV3 system order sheet.
Choose one of the following LMV3 options. See page 17 for mounting information.
LMV37.420A1
LMV36.520A1
Each LMV3 must be equipped with one AZL23.00A9 display. See page 18 for mounting
information and panel cutout dimensions.
AZL23.00A9
Each LMV3 must be equipped with a cable to connect the AZL23 display to the LMV3.
TDCCOMBO
Section 1

Control Panel Components

Base Unit – Qty (1) Required
Single fuel burner control with electronic fuel-air
ratio control of up to 2 actuators and a VFD, with
floating/bumping capability. Requires an external
PID controller
Dual fuel burner control with electronic fuel-air ratio
control of up to 2 actuators (3 connected) and a
VFD, without floating/bumping capability. Requires
an external PID controller
Display – Qty (1) Required
Backlit programming display unit
Display Cable – Qty (1) Required
Pre-made 10 foot cable and adapter for connecting
the AZL23 display to the LMV3
Page 2
LMV Series
SCC Inc.