Table of Contents
Advertisement
Figure 61 Safe value setting
5.5 Establish connection with GW-7552-B / GW-7552-M
The connection of Utility and GW-7552-B / GW-7552-M is shown in figure 62.
Please follow the steps to establish connection.
Step 1:
Wire Com Port of PC to RS-232 port of GW-7552-B / GW-7552-M.
Step 2:
Connect Profibus cable between Profibus master station and GW-7552-B /
GW-7552-M and enter data exchange mode (please refer step 1~6 of
section 4.8 Profibus and Modbus data exchange demo for detail). The
RUN LED of GW-7552-B / GW-7552-M is going to l
GW-7552-B / GW-7552-M PROFIBUS/MODBUS GATEWAY User Manual (Version 1.60, May/2017) PAGE: 64
ight at this time.
Advertisement
Table of Contents
